Explore repeated compression and controlled release of a thermoelastic solid in contact with a finite thermal reservoir.
Compare the insulated unit with a reservoir that can exchange heat with fixed-temperature surroundings. The model uses illustrative thermoelastic properties.
Thermally insulated unit
10 periods of 10.00 s · 1000 µε peak compression · solid–reservoir conductance 30 W/K.
Cumulative net work input
83.376 J
Change in stored energy
83.376 J
Capacity-weighted endpoint
300.490 K
10 uninterrupted periods · Temperature (K)
SolidFinite reservoir
Cumulative net actuator work · Energy (J)
Net work into unit
Maximum energy balance residual 2.51e-10 J. Internal contact Clausius metric 0.274192 J/K.
How does the mechanical timing affect heat exchange?
Keep amplitude fixed and change the two durations. Compare net work and the first heat-flow reversal below. The heat-rate sign is positive into the solid.
Net actuator work in period 1 is 10.216 J. The first heat-flow reversal is at 5.9324 s. Release starts at 5.000 s.
0.000 s · ε 0 µε · σ 0.0 kPa · solid 300.000 K · reservoir 300.000 K · heat into solid 0.0 W
Imposed engineering strain · Strain (µε)
Actuator command
Temperatures · Temperature (K)
SolidFinite reservoir
Signed heat flow · Power (W)
Positive into solid
Stress response · Stress (kPa)
Calculated axial stress
Stress–strain trajectory · Stress (kPa)
Compression then release
Stress deviation from the first compression chord · Stress deviation (kPa)