Contact entropy generation and reference exergy
With heat rate q = G(Tr − Ts) positive into the solid, the Clausius measure for entropy generation in the thermal connection is given by
After ten periods, IC is 0.274192 J/K. At a reference temperature of 300 K, the corresponding exergy destruction is 82.257 J and the increase in system exergy is 1.119 J. The full 83.376 J of net work is retained as internal energy in the insulated unit.
The constitutive law of the solid is reversible. Its thermoelastic response and the finite-rate exchange of heat with the neighbouring body jointly determine the calculated stress response. Because the thermal state changes during the first period, the net mechanical work includes a change in stored state. At the declared reference temperature, the division of work between the increase in system exergy and exergy destruction quantifies that distinction.
Internal thermoelastic damping in a spatially nonuniform solid
Nonuniform elastic deformation can create warmer and colder regions within the same solid. Heat conduction between those regions generates entropy. Under repeated loading, this can dissipate mechanical energy and contribute to hysteresis. It is the internal damping mechanism considered in the restricted thermoelastic interpretation on the Cycle tools main page. Other material losses, such as intrinsic relaxation or friction, would require additional constitutive terms.
The lumped solid in the ten-period model has no internal temperature gradients. The model therefore locates thermal entropy generation in the connection to the neighbouring mass. If both regions instead belong to one continuous solid with perfect thermal contact, the temperature can be continuous at their shared boundary while a finite difference persists across the intervening conducting material. In that case, state the two temperature locations and the conduction path explicitly.
When the reservoir can transfer heat to the surroundings
Connecting the reservoir to surroundings at fixed temperature adds a heat transfer path. If the temperatures settle into a stable periodic regime, both bodies reach the same temperatures at corresponding times in successive periods while continuing to warm and cool within each period. Net work input then equals net heat transferred to the surroundings over one period.
The interactive testbench includes both the insulated configuration and a heat-transfer connection to the surroundings.
Model scope and source
These figures use the numerical reference in Casper Helder's Thermoelastic compression and release of a solid coupled to a finite thermal reservoir, revised 21 November 2026. Each body is spatially uniform at a given instant. The model uses illustrative material parameters and a fixed conductance. The results describe this numerical example and require experimental calibration before use as a material prediction.