Reference guide

Terms & symbols

Definitions for reading the diagrams, choosing model inputs and interpreting results across CarnotX Academy.

Summary

This guide selects terms used in the website’s articles and tools, together with supporting definitions that help explain their results. Each entry gives a short meaning and links to the relevant analysis. Expand an entry for its assumptions, units or interpretation. The selected system boundary, sign convention, heat basis and model conditions remain part of every definition. Established thermodynamic concepts are distinguished from the proposed CarnotX benchmark methodology and the website’s trajectory-classification vocabulary. The same symbol can refer to a per-cycle amount, a specific amount or a rate only when the corresponding basis and unit are explicitly stated. Use the linked model description when interpreting a particular calculation.

At a glance

  • Read: a short definition for each selected website term.
  • Expand: symbols, assumptions and distinctions that affect interpretation.
  • Apply: direct links to relevant articles, diagrams and tools.
Find a term by name

Systems and heat interactions

System boundary

The declared boundary that determines which matter, heat transfers and work interactions belong to an analysis.

Technical context

A working-medium cycle, its external heat contacts and the complete coupled installation are different boundaries. A result for one boundary must be identified before it is compared with another.

Thermodynamic working medium

The material whose changes of state are followed in the selected cycle model. It may be a gas, a phase-changing fluid or a deformable solid.

Technical context

For a completed cycle, the complete thermodynamic state returns to its initial value. A fixed mass or a complete recirculating working-medium loop can be considered at the appropriate cycle boundary.

External thermal system

A system that supplies heat to, or receives heat from, the selected working medium.

Technical context

It can be an isothermal reservoir, a finite body or a flowing stream. Its local heat-transfer temperature can differ from the working-medium temperature. The word reservoir in a module should be read with that module’s stated finite- or constant-temperature assumptions.

Heat transfer and net cycle work

Notation: Q, q, Q̇; WUnit / basis: J; J/kg; W; J

Q is heat exchanged on a stated energy basis, q is specific heat transfer per unit mass, and Q̇ is heat-transfer rate. W is net work for the declared cycle.

Technical context

Energy, specific energy and power are different bases. For a complete closed heat engine, with heat-input and heat-rejection magnitudes taken positive, Wout = Qin − Qout. A work-driven cycle requires Win = Qdelivered − Qabsorbed. Always use the same basis and sign convention throughout the balance.

Boundary temperature

Notation: TUnit / basis: K

The local material temperature on the applicable side of a heat-transfer interaction.

Technical context

The medium and external-system temperatures coincide in the reversible heat-transfer limit and can differ during irreversible transfer. Absolute temperatures in kelvin are required in Clausius fractions, temperature ratios and exergy relations.

Temperature trajectories and heat transfer

T–Q trajectory

Notation: T(Q)Unit / basis: K versus J, J/kg or W

A record of the temperature associated with successive heat-transfer quantities, on the heat basis stated on the diagram.

Technical context

A rate-based diagram uses cumulative transferred heat rate, Q̇, rather than energy Q. Separate high- and low-temperature cycle branches are different interactions; paired hot and cold curves within one exchanger describe the same transferred heat. Horizontal alignment must be interpreted using the diagram’s pairing convention.

Isothermal and non-isothermal heat interactions

In an isothermal interaction, the specified heat-transfer-side temperature stays constant. A non-isothermal interaction has a changing temperature along its heat-transfer trajectory.

Technical context

This describes temperature behaviour at the specified side of the boundary. Two sides can each remain at constant but different temperatures: the transfer is then isothermal on each side yet irreversible. A changing temperature does not by itself imply irreversibility.

Linear-gliding temperature cycles

CarnotX trajectory classification

The website’s parent class for cycle models whose two specified non-isothermal heat-exchange branches are linear in T–Q on a common heat basis.

Technical context

The classification applies to the selected model and inputs. Constant effective branch heat capacities give straight T–Q paths; temperature-dependent properties can produce curved paths. The trajectory class does not uniquely identify an internal process architecture.

Iso-linear and non-iso-linear T–Q

CarnotX trajectory classification

Iso-linear branches have equal slope magnitudes on the same heat basis. Non-iso-linear branches are both linear but have unequal slope magnitudes.

Technical context

Brayton and Otto can both be iso-linear in their constant-property ideal-gas models despite different internal processes. Non-iso-linear is different from nonlinear: the former still has straight branches. Normalizing each heat axis separately can obscure the slope comparison.

Piecewise-isothermal heat interactions

A finite set of distinct heat interactions that each occur at their own constant temperature.

Technical context

The seven-reservoir example uses physically distinct isothermal contacts. Subdividing a continuously changing-temperature trajectory for numerical integration does not turn that physical process into a set of distinct isothermal contacts.

Thermal Matching

CarnotX operational framing

Adjusting interacting temperature trajectories in shape, level or heat-duty distribution to improve local thermal alignment under declared constraints.

Technical context

It can include temperature-level adjustment in isothermal contacts. Improvement caused solely by increasing UA is conductance enhancement. A comparison must state which conditions can change; improved local alignment alone does not quantify an overall efficiency or COP benefit.

Overall heat-transfer conductance

Notation: UAUnit / basis: W/K

The heat-transfer conductance formed by the overall coefficient U and its corresponding area A when U is spatially constant.

Technical context

U has units W/(m² K) and A has units m² on the same area basis. The local exchanger model is dQ̇ = U ΔT dA. With varying U, integrate the local conductance over area. Nonzero transfer at finite conductance needs a driving temperature difference.

T–A diagram

Unit / basis: K versus m²

The paired stream temperatures plotted against cumulative physical heat-exchanger area.

Technical context

With constant U, ∫ΔT dA = Q̇/U. The geometric gap integral has units K·m² and is distinct from physical area A in m². The T–Q gap integral has another weighting. Neither geometric gap alone is a direct measure of exergy destruction.

Cycles, references and performance

Reversible cycle

A complete cycle that can be reversed with both the system and its surroundings restored, without a lasting change, within the declared model and boundary.

Technical context

The applicable energy balance, state closure, constitutive relations, admissibility conditions and reversibility of interactions must be satisfied. Reversible heat interactions may be isothermal or non-isothermal. Internal reversibility of a medium and reversibility of its external heat contacts are distinct assessments.

Reversible-cycle benchmark

A reversible reference configured for specified fixed data, an objective, a system boundary and a declared set of allowed alternatives.

Technical context

Its work, efficiency or COP is conditional on those constraints. A maximum or minimum requires qualification over that comparison class. Different constraints can give different reversible counterparts for the same initial irreversible case.

Parent Reversible Cycle Benchmark Framework

Proposed CarnotX methodology

The website’s framework for operationalizing reversible-cycle equalities together with energy balances, process and material relations, state closure and admissibility conditions.

Technical context

The Clausius reversible-cycle equality and exergy principles are established thermodynamics. Their organization into this parent benchmark framework is the proposed CarnotX methodology. The two-isothermal Carnot case is a specific reference within its stated scope.

Reversible solution space

The parameter combinations satisfying the selected reversible equality together with the model’s other stated constraints.

Technical context

Fixed variables define the explored slice; free variables are varied or solved. A two- or three-dimensional plot is a projection or slice of the full parameter space. A familiar efficiency formula alone does not specify all cycle states, dimensions or admissibility conditions.

Fixed data, free variables and comparison class

Fixed data are retained conditions; free variables may be selected or solved; the comparison class is the declared set of permitted alternatives.

Technical context

These choices define the engineering question. Changing heat duties, external stream states or permitted cycle architecture can change the reference. A number called maximum COP or lost work must be interpreted with these choices in view.

Thermal efficiency

Notation: ηUnit / basis: Dimensionless, often %

For the stated heat-engine boundary, net work output divided by external heat input.

Technical context

For the two-duty engine, η = Wout/Qin = 1 − Qout/Qin. Reversibility does not imply η = 1. A reversible efficiency is conditional on its thermal trajectories and reference constraints.

Coefficient of performance

Notation: COPUnit / basis: Dimensionless

Useful heating or cooling duty divided by the net work input at the same declared boundary.

Technical context

Heating COP = Qdelivered/Win; refrigeration COP = Qabsorbed/Win. For the same two-duty cyclic boundary, heating COP = refrigeration COP + 1. COP is a performance ratio and can exceed one. A maximum depends on the thermal service and allowed class of systems.

Clausius, entropy and exergy results

Clausius reversible-cycle equality

Notation: ∮ δQ/T = 0

The signed heat–temperature equality over a complete reversible cycle, with heat positive into the selected cycle boundary.

Technical context

T is the applicable local absolute transfer temperature. Physically discrete isothermal contacts can be summed exactly as Qᵢ/Tᵢ. Continuous trajectories require their integrals; finite numerical steps approximate these and should be evaluated at adequate resolution.

Clausius reversible-cycle equality residual

Notation: Σ(Δq/T) or Σ(ΔQ/T)Unit / basis: kJ/(kg K) or kJ/K on the stated basis

The signed numerical departure from zero of the complete-cycle heat–temperature sum used by the selected model.

Technical context

A green check applies the numerical tolerance shown with the result to its unrounded value. This checks the selected equality under its model assumptions. It is distinct from the change of the entropy state quantity, from external-contact entropy generation and from a full physical reversibility assessment. Continuous ∮ notation remains appropriate for the analytical equality.

Entropy state closure

Notation: ΔScycle = 0Unit / basis: J/K or J/(kg K)

The return of the entropy state quantity to its initial value when the complete state of a closed cyclic medium is restored.

Technical context

This holds for both reversible and irreversible complete cycles. Entropy generated within an irreversible cyclic system must be balanced by entropy transfer out. Zero state change is therefore different from zero entropy generation and from the reversible heat–temperature equality.

Entropy generation

Notation: Sgen or ṠgenUnit / basis: J/K or W/K

The nonnegative entropy produced by irreversibility within the stated system boundary.

Technical context

For heat transferred from a hot body to a cold body, the thermal contribution is ∫(1/Tcold − 1/Thot) δQ. Pressure losses and internal dissipative mechanisms can add contributions. Identify whether a module reports an amount, a specific amount or a rate.

Exergy

Unit / basis: J, or W for a rate

Useful-work potential evaluated relative to a specified reference environment.

Technical context

The reference environment includes its absolute temperature T₀. Exergy itself is different from exergy destruction. A change in stored exergy and exergy transferred across a boundary must be distinguished from exergy destroyed within it.

Exergy destruction

Notation: ED = T₀ SgenUnit / basis: J, or W for a rate

The reference-environment-relative work potential destroyed through irreversibility.

Technical context

Under the stated Gouy–Stodola conditions, ĖD = T₀ Ṡgen. T₀ must be positive and expressed in kelvin. This is different from an energy-balance loss and is not automatically identical to a work difference between two independently configured cycles.

Benchmark-relative lost or excess work

Unit / basis: J on a per-cycle energy basis

The difference between actual and reversible-reference work under a declared comparison.

Technical context

For an engine the direct comparison is Wrev − Wact; for a work-driven cycle it is Wact − Wrev. Nonnegativity requires the reversible reference to be qualified as the appropriate work optimum under the common constraints. This comparison depends on the permitted changes and is not automatically exergy destruction at an independently chosen T₀.

Solid media and material response

Solid thermodynamic medium

A deformable solid whose thermal and mechanical state changes form the working-medium description of the selected process or cycle.

Technical context

Temperature, deformation or stress, and relevant phase or internal variables belong to the state. For a nonuniform body, its spatial temperature field also matters. The whole state must repeat before a mechanical loading period is identified as a closed thermodynamic cycle.

Thermoelastic coupling

The coupling between elastic deformation and thermal state, through which loading or unloading can change temperature and temperature can affect mechanical response.

Technical context

Its sign and magnitude depend on the material, state and loading mode. The website’s aluminium and elastomer models use their specified constitutive assumptions. Their illustrative results do not define a general damping law for real materials.

Hysteresis and material damping

Unit / basis: Loop energy: J, or J/m³ for a stress–strain loop

Hysteresis is a difference between loading and unloading paths. Material damping concerns the dissipative part of a mechanical response under specified conditions.

Technical context

A force–displacement loop gives mechanical work; a stress–strain loop gives work per unit volume under its stated measures and sign convention. A reversible heat–work cycle can itself enclose a nonzero loop. The full loop area is not automatically all dissipative material loss. Distinguish internal dissipation from irreversibility at external heat contacts.

Finite thermal reservoir

A neighbouring thermal body with finite heat capacity whose temperature can change as it receives or supplies heat.

Technical context

The loading analysis follows the solid and neighbouring body over successive periods. Repeated mechanical loading need not immediately restore the thermal state after each period. The boundary condition for heat exchange with the wider surroundings is specified separately.

Definitions and editorial basis

The terminology is adapted for website use from Formal Core R189 L19, Nomenclature, Symbols, and Defined Terms, printed pages 118–126, and the model explanations in the linked Academy articles and tools. The Formal Core’s primary definitions, boundary conventions and qualifications guide the selected methodological entries. This page is a curated website reference rather than a reproduction of its complete nomenclature.

Established physical quantities and balances retain their stated thermodynamic scope. Entries marked as CarnotX operational framing, proposed methodology or trajectory classification describe how the website organizes and applies those concepts. Numerical equality residuals and illustrative material models retain the qualifications shown with their results.